OBD11 - kodowanie
- Enriquez
- Administrator
- Posty: 13609
- Rejestracja: 2 cze 2012, o 09:20
- Samochód: Inny
- Rocznik: 2022
- Silnik: Inny
- Imię: Marcin
- Lokalizacja: Łódź - Wieś ELW
Re: OBD11 - kodowanie
to Audi style, takie cusik - też nie będzie działać?
************
Audi style DRL and TURN signal:
Controller 09 - Central Electronics
16 - Security Access - enter 31347
10 - Adaptations:
1. Leuchte2SL VLB10 Front Left 1
a. Chose channel, which has no active function assigned to it. In my case it was channel E, then
b. set it Leuchte2SL VLB10-Lichtfunktion E2 to «Blinken links Dunkelphase»
c. Leuchte2SL VLB10-dimming EF2 – set «100» (this is not max value for LED)
g. Leuchte2SL VLB10 dimming Direction EF2 – set «Maximize»
2. Leuchte4TFL LB4 Front Left 2
a. Chose channel, which has no active function assigned to it. In my case it was channel E, then
b. set it Leuchte4TFL LB4 -Lichtfunktion E2 to «Blinken links Dunkelphase»
c. Leuchte4TFL LB4 -dimming EF2 – set to 100
d. Leuchte4TFL LB4 dimming Direction EF2 –set to «Maximize»
3. Leuchte3SL VRB21 Front right 1
a. Chose channel, which has no active function assigned to it. In my case it was channel E, then
b. set it Leuchte3SL VRB21-Lichtfunktion E2 – to – «Blinken rechts Dunkelphase»
c. Leuchte3SL VRB21-dimming EF2 – set to «100»
d. Leuchte3SL VRB21 dimming Direction EF2 – set to «Maximize»
4. Leuchte5 TFL RB32 Front right 2
a. Chose channel, which has no active function assigned to it. In my case it was channel E, then
e. set it Leuchte5TFL RB32 -Lichtfunktion E2 – to– «Blinken rechts Dunkelphase»
f. Leuchte5TFL RB32 -dimming EF2 – set to «100»
g. Leuchte5TFL RB32 dimming Direction EF2 –set to «Maximize»
************
Audi style DRL and TURN signal:
Controller 09 - Central Electronics
16 - Security Access - enter 31347
10 - Adaptations:
1. Leuchte2SL VLB10 Front Left 1
a. Chose channel, which has no active function assigned to it. In my case it was channel E, then
b. set it Leuchte2SL VLB10-Lichtfunktion E2 to «Blinken links Dunkelphase»
c. Leuchte2SL VLB10-dimming EF2 – set «100» (this is not max value for LED)
g. Leuchte2SL VLB10 dimming Direction EF2 – set «Maximize»
2. Leuchte4TFL LB4 Front Left 2
a. Chose channel, which has no active function assigned to it. In my case it was channel E, then
b. set it Leuchte4TFL LB4 -Lichtfunktion E2 to «Blinken links Dunkelphase»
c. Leuchte4TFL LB4 -dimming EF2 – set to 100
d. Leuchte4TFL LB4 dimming Direction EF2 –set to «Maximize»
3. Leuchte3SL VRB21 Front right 1
a. Chose channel, which has no active function assigned to it. In my case it was channel E, then
b. set it Leuchte3SL VRB21-Lichtfunktion E2 – to – «Blinken rechts Dunkelphase»
c. Leuchte3SL VRB21-dimming EF2 – set to «100»
d. Leuchte3SL VRB21 dimming Direction EF2 – set to «Maximize»
4. Leuchte5 TFL RB32 Front right 2
a. Chose channel, which has no active function assigned to it. In my case it was channel E, then
e. set it Leuchte5TFL RB32 -Lichtfunktion E2 – to– «Blinken rechts Dunkelphase»
f. Leuchte5TFL RB32 -dimming EF2 – set to «100»
g. Leuchte5TFL RB32 dimming Direction EF2 –set to «Maximize»
Pozdrawiam
Marcin
---
Nie udzielam porad technicznych na PW. Nie podejmuję się wykonywania żadnych modyfikacji w cudzych samochodach. Proszę mnie o to nie pytać.
Marcin
---
Nie udzielam porad technicznych na PW. Nie podejmuję się wykonywania żadnych modyfikacji w cudzych samochodach. Proszę mnie o to nie pytać.
- RybaDK
- Posty: 293
- Rejestracja: 24 gru 2016, o 22:22
- Samochód: Superb III combi
- Silnik: 2.0TDI (190KM)
- Imię: Darek
Re: OBD11 - kodowanie
Radar jest ? Od wersji ambition w górę był zawsze fabrycznie dla wersji active zapomnij.woju80 pisze:Witam
Czy da sie przy pomocy OBD11 zakodowac Front Assist w Superbie 3 ?
Jesli tak to jakie jest kodowanie ?
Wysłane z mojego HTC 10 evo przy użyciu Tapatalka
-
- Posty: 31
- Rejestracja: 27 lis 2017, o 19:39
- Samochód: Superb III
- Silnik: 1.4TSI (150KM)
- Imię: jacek
Re: OBD11 - kodowanie
Jak to wygląda
to Audi style, takie cusik - też nie będzie działać?
************
Audi style DRL and TURN signal:
-
- Posty: 31
- Rejestracja: 27 lis 2017, o 19:39
- Samochód: Superb III
- Silnik: 1.4TSI (150KM)
- Imię: jacek
Re: OBD11 - kodowanie
wie ktoś może jak wyłączyć przełączanie na dwa cylindry
Mnie to wkurza bo czuję zauważalne drżenie a serwis mówi że jest OK
Mnie to wkurza bo czuję zauważalne drżenie a serwis mówi że jest OK
-
- Posty: 955
- Rejestracja: 30 kwie 2011, o 01:34
- Samochód: Superb III combi 4x4
- Silnik: 2.0TSI (280KM)
- Aktualnie: 371 KM/482 Nm
- Imię: Mariusz
- Lokalizacja: Poznań
Re: OBD11 - kodowanie
Maestro DZIAŁA !!! THXEnriquez pisze:to Audi style, takie cusik - też nie będzie działać?
************
Audi style DRL and TURN signal:
Controller 09 - Central Electronics
16 - Security Access - enter 31347
10 - Adaptations:
1. Leuchte2SL VLB10 Front Left 1
a. Chose channel, which has no active function assigned to it. In my case it was channel E, then
b. set it Leuchte2SL VLB10-Lichtfunktion E2 to «Blinken links Dunkelphase»
c. Leuchte2SL VLB10-dimming EF2 – set «100» (this is not max value for LED)
g. Leuchte2SL VLB10 dimming Direction EF2 – set «Maximize»
2. Leuchte4TFL LB4 Front Left 2
a. Chose channel, which has no active function assigned to it. In my case it was channel E, then
b. set it Leuchte4TFL LB4 -Lichtfunktion E2 to «Blinken links Dunkelphase»
c. Leuchte4TFL LB4 -dimming EF2 – set to 100
d. Leuchte4TFL LB4 dimming Direction EF2 –set to «Maximize»
3. Leuchte3SL VRB21 Front right 1
a. Chose channel, which has no active function assigned to it. In my case it was channel E, then
b. set it Leuchte3SL VRB21-Lichtfunktion E2 – to – «Blinken rechts Dunkelphase»
c. Leuchte3SL VRB21-dimming EF2 – set to «100»
d. Leuchte3SL VRB21 dimming Direction EF2 – set to «Maximize»
4. Leuchte5 TFL RB32 Front right 2
a. Chose channel, which has no active function assigned to it. In my case it was channel E, then
e. set it Leuchte5TFL RB32 -Lichtfunktion E2 – to– «Blinken rechts Dunkelphase»
f. Leuchte5TFL RB32 -dimming EF2 – set to «100»
g. Leuchte5TFL RB32 dimming Direction EF2 –set to «Maximize»
- Enriquez
- Administrator
- Posty: 13609
- Rejestracja: 2 cze 2012, o 09:20
- Samochód: Inny
- Rocznik: 2022
- Silnik: Inny
- Imię: Marcin
- Lokalizacja: Łódź - Wieś ELW
Re: OBD11 - kodowanie
Proszę uprzejmie.
Pozdrawiam
Marcin
---
Nie udzielam porad technicznych na PW. Nie podejmuję się wykonywania żadnych modyfikacji w cudzych samochodach. Proszę mnie o to nie pytać.
Marcin
---
Nie udzielam porad technicznych na PW. Nie podejmuję się wykonywania żadnych modyfikacji w cudzych samochodach. Proszę mnie o to nie pytać.
- Tom-Tdi
- Sponsor
- Posty: 3353
- Rejestracja: 26 kwie 2016, o 00:09
- Samochód: Superb III combi 4x4
- Silnik: 2.0TSI (280KM)
- Aktualnie: 395KM / 515Nm
- Lokalizacja: Augsburg
Re: OBD11 - kodowanie
Czyli trzeba trochę więcej opcji pozmieniac i bangla u tych co mieli aktualizację świateł - brawo Enriquez
-
- Posty: 31
- Rejestracja: 27 lis 2017, o 19:39
- Samochód: Superb III
- Silnik: 1.4TSI (150KM)
- Imię: jacek
Re: OBD11 - kodowanie
Enriquez dzięki działają "piękne kierunkowskazy"
U mnie na my18 odb11 dokładnie wygląda to tak:
Controller 09 - Central Electronics
Security Access - enter 31347
Adaptations:
1. Leuchte2SL VLB10 Front Left 1
Leuchte2SL VLB10-Lichtfunktion E2 to «Blinken links Dunkelphase»
Leuchte2SL VLB10-dimmwert EF2 – set «100» (this is not max value for LED)
Leuchte2SL VLB10 dimming Direction EF2 – set «Maximize»
2. Leuchte4TFL LB4 Front Left 2
Leuchte4TFL LB4 -Lichtfunktion E4 to «Blinken links Dunkelphase»
Leuchte4TFL LB4 -dimmwert EF4 – set to 100
Leuchte4TFL LB4 dimming Direction EF4 –set to «Maximize»
3. Leuchte3SL VRB21 Front right 1
Leuchte3SL VRB21-Lichtfunktion E3 – to – «Blinken rechts Dunkelphase»
Leuchte3SL VRB21-dimmwert EF3 – set to «100»
Leuchte3SL VRB21 dimming Direction GH3 – set to «Maximize»
4. Leuchte5 TFL RB32 Front right 2
Leuchte5TFL RB32 -Lichtfunktion E5 – to– «Blinken rechts Dunkelphase»
Leuchte5TFL RB32 -dimmwert EF5 – set to «100»
Leuchte5TFL RB32 dimming Direction GH5 –set to «Maximize»
pozostaje prośba czy ma ktoś pomysł na wyłączenie trybu dwucylindrowego
pozdrawiam
U mnie na my18 odb11 dokładnie wygląda to tak:
Controller 09 - Central Electronics
Security Access - enter 31347
Adaptations:
1. Leuchte2SL VLB10 Front Left 1
Leuchte2SL VLB10-Lichtfunktion E2 to «Blinken links Dunkelphase»
Leuchte2SL VLB10-dimmwert EF2 – set «100» (this is not max value for LED)
Leuchte2SL VLB10 dimming Direction EF2 – set «Maximize»
2. Leuchte4TFL LB4 Front Left 2
Leuchte4TFL LB4 -Lichtfunktion E4 to «Blinken links Dunkelphase»
Leuchte4TFL LB4 -dimmwert EF4 – set to 100
Leuchte4TFL LB4 dimming Direction EF4 –set to «Maximize»
3. Leuchte3SL VRB21 Front right 1
Leuchte3SL VRB21-Lichtfunktion E3 – to – «Blinken rechts Dunkelphase»
Leuchte3SL VRB21-dimmwert EF3 – set to «100»
Leuchte3SL VRB21 dimming Direction GH3 – set to «Maximize»
4. Leuchte5 TFL RB32 Front right 2
Leuchte5TFL RB32 -Lichtfunktion E5 – to– «Blinken rechts Dunkelphase»
Leuchte5TFL RB32 -dimmwert EF5 – set to «100»
Leuchte5TFL RB32 dimming Direction GH5 –set to «Maximize»
pozostaje prośba czy ma ktoś pomysł na wyłączenie trybu dwucylindrowego
pozdrawiam
-
- Posty: 217
- Rejestracja: 15 wrz 2014, o 14:11
- Samochód: Superb III
- Silnik: 1.4TSI CAXC (125KM)
Re: OBD11 - kodowanie
Ja za to chętnie bym wyciszyl trochę dźwięk kierunkowskazów.
W Skodach ten dźwięk jest wyjątkowo irytujący.
W Skodach ten dźwięk jest wyjątkowo irytujący.
- twrdxy
- Posty: 227
- Rejestracja: 21 sty 2018, o 20:38
- Samochód: Inny
- Rocznik: 2017
- Silnik: Inny
- Aktualnie: 305/600
- Imię: Mateusz
- Lokalizacja: WAW
Re: OBD11 - kodowanie
Na poprzedniej stronie masz linki do youTubejacek55555 pisze:Jak to wyglądato Audi style, takie cusik - też nie będzie działać?
************
Audi style DRL and TURN signal:
- whity
- Posty: 14835
- Rejestracja: 23 sty 2015, o 16:53
- Samochód: Inny
- Silnik: Inny
- Aktualnie: 333km / 703nm
- Lokalizacja: MS
Re: OBD11 - kodowanie
nie jeździ na ecojacek55555 pisze:wie ktoś może jak wyłączyć przełączanie na dwa cylindry
Mnie to wkurza bo czuję zauważalne drżenie a serwis mówi że jest OK
Nie bójcie się być premium.
#stayPremium
#stayPremium
-
- Posty: 31
- Rejestracja: 27 lis 2017, o 19:39
- Samochód: Superb III
- Silnik: 1.4TSI (150KM)
- Imię: jacek
-
- Posty: 119
- Rejestracja: 31 paź 2017, o 12:02
- Samochód: Superb III combi
- Silnik: 2.0TDI (190KM)
Re: OBD11 - kodowanie
Włączyłem wyświetlanie "możliwa ilość paliwa do zatankowania".
Ale pokazywało mi 45l a weszło 55!!!
Aż tyle to na stacji chyba nie mogli skroić )
Czy trzeba gdzieś ustawić ile ma zbiornik paliwa?
Ale pokazywało mi 45l a weszło 55!!!
Aż tyle to na stacji chyba nie mogli skroić )
Czy trzeba gdzieś ustawić ile ma zbiornik paliwa?