Re: OBD11 - kodowanie
: 14 maja 2018, o 18:55
Czy da się jakoś ustawić wygaszacz ekranu na stałe aby nie trzeba było za każdym razem po odpaleniu załączać tej funkcji w ustawieniach
Portal miłośników i użytkowników Skody Superb
http://www.superbclub.pl/
Nie chce mi sie film załadować do okna zobacz na linkElninjo pisze:marasmus007 pisze:Maestro DZIAŁA !!! THXEnriquez pisze:to Audi style, takie cusik - też nie będzie działać?
************
Audi style DRL and TURN signal:
Controller 09 - Central Electronics
16 - Security Access - enter 31347
10 - Adaptations:
1. Leuchte2SL VLB10 Front Left 1
a. Chose channel, which has no active function assigned to it. In my case it was channel E, then
b. set it Leuchte2SL VLB10-Lichtfunktion E2 to «Blinken links Dunkelphase»
c. Leuchte2SL VLB10-dimming EF2 – set «100» (this is not max value for LED)
g. Leuchte2SL VLB10 dimming Direction EF2 – set «Maximize»
2. Leuchte4TFL LB4 Front Left 2
a. Chose channel, which has no active function assigned to it. In my case it was channel E, then
b. set it Leuchte4TFL LB4 -Lichtfunktion E2 to «Blinken links Dunkelphase»
c. Leuchte4TFL LB4 -dimming EF2 – set to 100
d. Leuchte4TFL LB4 dimming Direction EF2 –set to «Maximize»
3. Leuchte3SL VRB21 Front right 1
a. Chose channel, which has no active function assigned to it. In my case it was channel E, then
b. set it Leuchte3SL VRB21-Lichtfunktion E2 – to – «Blinken rechts Dunkelphase»
c. Leuchte3SL VRB21-dimming EF2 – set to «100»
d. Leuchte3SL VRB21 dimming Direction EF2 – set to «Maximize»
4. Leuchte5 TFL RB32 Front right 2
a. Chose channel, which has no active function assigned to it. In my case it was channel E, then
e. set it Leuchte5TFL RB32 -Lichtfunktion E2 – to– «Blinken rechts Dunkelphase»
f. Leuchte5TFL RB32 -dimming EF2 – set to «100»
g. Leuchte5TFL RB32 dimming Direction EF2 –set to «Maximize»
Marasmus zrób filmik z efektu...
hmmm , trochę dziwne sprawdzałem na 3 kompach w firmie i śmigałoElninjo pisze:Nie działa link...
nie sieje wtedy błędami?Tom-Tdi pisze:Najbardziej prymitywny sposób, to odpiecie kabli od klap wydechu w momencie kiedy są otwarte.