OBD11 - kodowanie
-
- Posty: 148
- Rejestracja: 18 sie 2019, o 21:24
- Samochód: Superb III
- Silnik: 2.0TSI (272KM)
- Aktualnie: obecnie 380/530
Re: OBD11 - kodowanie
Witam czy ktoś wiej za zrobić adaptację/kalibracje klapy bagaznika w obd11 pro?
-
- Posty: 148
- Rejestracja: 18 sie 2019, o 21:24
- Samochód: Superb III
- Silnik: 2.0TSI (272KM)
- Aktualnie: obecnie 380/530
Re: OBD11 - kodowanie
Prośba do osób korzystających z liftbacka (limizyny) zwal jak zwał z elektryczną klapą bagażnika. I które posiadają obd11 . Bardzo was proszę o backup sterownika 6d jest sterownik pokrywy bagaznika. Mój coś sz z wankuje i chciałbym zrobić porównanie wartosci.
ok czy ktoś mogłby sprawdzić moje wartości w swoim sterowniku i porównać z moimi i ewentualnie wskazać które wartości zmienić ? sterownik 6d----> adaptacje
Backup
Control unit: 6D Deck Lid Control Unit
Long coding:
1008
Adaptations:
Activating and deactivating all development messages:
Activating and deactivating all development messages:
not active
Deactivate production mode:
Deactivate production mode:
Deactivating
Deactivation of tailgate:
Deactivation of tailgate:
not active
Deactivation of tailgate while in trailer operation:
Release button in rear lid handle:
active
Using button to close lock. mechanism in tailgate handle:
active
Button for opening rear lid in luggage compartment:
active
Rear lid lock button in luggage compartment:
active
Sensor for rear lid opening:
active
Remote ctrl, opening with button for tailgate unlock. mechan.:
not active
Remote ctrl, closing with button for tailgate unlock. mechan.:
not active
Opening with button for remote unlocking of tailgate:
not active
Closing with remote unl.button of tailgate when using a trailer:
not active
Using sensor to open tailgate:
not active
Using sensor to close tailgate:
not active
Öffnen mit Taster 2 für Fernentriegelung der Heckklappe:
not active
Schließen m. Taster 2 f. Fernentr. d. Heckkl. b. Anhängerbetr.:
not active
Dectivation of the luggage compartment cover:
Dectivation of the luggage compartment cover:
not active
Detection area upper:
Detection area upper:
20
Luggage compartment cover, adjust. track tolerance:
Luggage compartment cover, adjust. track tolerance:
88
Luggage compartment cover, detection area:
Detection area lower:
30
Detection area upper:
30
Luggage compartment cover, excess limitation in exclusion area:
Luggage compartment cover, excess limitation in exclusion area:
not active
Luggage compartment cover, maximum no. of block drives:
Luggage compartment cover, maximum no. of block drives:
7
Luggage compartment cover, number bloom drives:
Luggage compartment cover, number bloom drives:
100
Luggage compartment cover, reverse path after obstacle recogn.:
Open:
2
Close:
2
Luggage compartment cover, tolerance of the block counter:
Luggage compartment cover, tolerance of the block counter:
20
Minimum opening height of tailgate:
Minimum opening height of tailgate:
1500
Offset for maximum programmable opening stop:
Offset for maximum programmable opening stop:
20
Offset for opening height after basic setting:
Offset for opening height after basic setting:
0
Opening height in production mode:
Opening height in production mode:
60 %
Production mode:
Activation due to excessive pressure on rear lid:
not active
Opening height in production mode:
not active
Opening and closing rear lid:
not active
Tone sensor:
not active
Activation of rear lid with reduced speed:
not active
Calibration:
not active
Checking the rear lid button:
not active
Program opening stop:
Program opening stop:
1864
Tailgate reverse path:
Reverse path when closing:
100
Reverse path when opening:
100
Ausstattungen aktivieren:
Engine 2:
active
Motor 2, sensor system:
active
Tone sensor:
active
Clamping strip 1:
active
Clamping strip 2:
active
Clamping strip 3:
active
Clamping strip 4:
active
Temperature sensor 1:
active
Temperature sensor 2:
active
Closing assist motor:
active
ok czy ktoś mogłby sprawdzić moje wartości w swoim sterowniku i porównać z moimi i ewentualnie wskazać które wartości zmienić ? sterownik 6d----> adaptacje
Backup
Control unit: 6D Deck Lid Control Unit
Long coding:
1008
Adaptations:
Activating and deactivating all development messages:
Activating and deactivating all development messages:
not active
Deactivate production mode:
Deactivate production mode:
Deactivating
Deactivation of tailgate:
Deactivation of tailgate:
not active
Deactivation of tailgate while in trailer operation:
Release button in rear lid handle:
active
Using button to close lock. mechanism in tailgate handle:
active
Button for opening rear lid in luggage compartment:
active
Rear lid lock button in luggage compartment:
active
Sensor for rear lid opening:
active
Remote ctrl, opening with button for tailgate unlock. mechan.:
not active
Remote ctrl, closing with button for tailgate unlock. mechan.:
not active
Opening with button for remote unlocking of tailgate:
not active
Closing with remote unl.button of tailgate when using a trailer:
not active
Using sensor to open tailgate:
not active
Using sensor to close tailgate:
not active
Öffnen mit Taster 2 für Fernentriegelung der Heckklappe:
not active
Schließen m. Taster 2 f. Fernentr. d. Heckkl. b. Anhängerbetr.:
not active
Dectivation of the luggage compartment cover:
Dectivation of the luggage compartment cover:
not active
Detection area upper:
Detection area upper:
20
Luggage compartment cover, adjust. track tolerance:
Luggage compartment cover, adjust. track tolerance:
88
Luggage compartment cover, detection area:
Detection area lower:
30
Detection area upper:
30
Luggage compartment cover, excess limitation in exclusion area:
Luggage compartment cover, excess limitation in exclusion area:
not active
Luggage compartment cover, maximum no. of block drives:
Luggage compartment cover, maximum no. of block drives:
7
Luggage compartment cover, number bloom drives:
Luggage compartment cover, number bloom drives:
100
Luggage compartment cover, reverse path after obstacle recogn.:
Open:
2
Close:
2
Luggage compartment cover, tolerance of the block counter:
Luggage compartment cover, tolerance of the block counter:
20
Minimum opening height of tailgate:
Minimum opening height of tailgate:
1500
Offset for maximum programmable opening stop:
Offset for maximum programmable opening stop:
20
Offset for opening height after basic setting:
Offset for opening height after basic setting:
0
Opening height in production mode:
Opening height in production mode:
60 %
Production mode:
Activation due to excessive pressure on rear lid:
not active
Opening height in production mode:
not active
Opening and closing rear lid:
not active
Tone sensor:
not active
Activation of rear lid with reduced speed:
not active
Calibration:
not active
Checking the rear lid button:
not active
Program opening stop:
Program opening stop:
1864
Tailgate reverse path:
Reverse path when closing:
100
Reverse path when opening:
100
Ausstattungen aktivieren:
Engine 2:
active
Motor 2, sensor system:
active
Tone sensor:
active
Clamping strip 1:
active
Clamping strip 2:
active
Clamping strip 3:
active
Clamping strip 4:
active
Temperature sensor 1:
active
Temperature sensor 2:
active
Closing assist motor:
active
Ostatnio zmieniony 21 sie 2019, o 22:57 przez maniek245, łącznie zmieniany 1 raz.
- Tom-Tdi
- Sponsor
- Posty: 3353
- Rejestracja: 26 kwie 2016, o 00:09
- Samochód: Superb III combi 4x4
- Silnik: 2.0TSI (280KM)
- Aktualnie: 395KM / 515Nm
- Lokalizacja: Augsburg
Re: OBD11 - kodowanie
Enriquez pisze:Zapodaj linka. Może se zrobię ten reset.
https://www.skodacommunity.de/threads/t ... st-1381310
-
- Posty: 6
- Rejestracja: 14 cze 2019, o 12:26
- Samochód: Superb III 4x4
- Silnik: 1.6TDI (120KM)
- Imię: Paweł
Re: OBD11 - kodowanie
@maniek245 moja kopia możesz sobie porównać
Kod: Zaznacz cały
Long coding:
1008
Vehicle variant:
SK481
Button for closing and locking in the rear lid:
not installed
Subnetwork op.:
not active
Kessy:
installed
Adaptations:
Program opening stop:
Program opening stop:
2029
Offset for maximum programmable opening stop:
Offset for maximum programmable opening stop:
20
Minimum opening height of tailgate:
Minimum opening height of tailgate:
600
Offset for opening height after basic setting:
Offset for opening height after basic setting:
0
Detection area upper:
Detection area upper:
10
Opening height in production mode:
Opening height in production mode:
60 %
Activating and deactivating all development messages:
Activating and deactivating all development messages:
not active
Deactivate production mode:
Deactivate production mode:
Deactivating
Production mode:
Activation due to excessive pressure on rear lid:
not active
Opening height in production mode:
not active
Opening and closing rear lid:
not active
Tone sensor:
not active
Activation of rear lid with reduced speed:
not active
Calibration:
not active
Checking the rear lid button:
not active
Tailgate reverse path:
Reverse path when closing:
7
Reverse path when opening:
4
Deactivation of tailgate:
Deactivation of tailgate:
active
Dectivation of the luggage compartment cover:
Dectivation of the luggage compartment cover:
not active
Deactivation of tailgate while in trailer operation:
Release button in rear lid handle:
active
Using button to close lock. mechanism in tailgate handle:
active
Button for opening rear lid in luggage compartment:
active
Rear lid lock button in luggage compartment:
active
Sensor for rear lid opening:
active
Remote ctrl, opening with button for tailgate unlock. mechan.:
not active
Remote ctrl, closing with button for tailgate unlock. mechan.:
not active
Opening with button for remote unlocking of tailgate:
not active
Closing with remote unl.button of tailgate when using a trailer:
not active
Using sensor to open tailgate:
not active
Using sensor to close tailgate:
not active
Öffnen mit Taster 2 für Fernentriegelung der Heckklappe:
not active
Schließen m. Taster 2 f. Fernentr. d. Heckkl. b. Anhängerbetr.:
not active
Ausstattungen aktivieren:
Engine 2:
active
Motor 2, sensor system:
active
Tone sensor:
active
Clamping strip 1:
not active
Clamping strip 2:
not active
Clamping strip 3:
not active
Clamping strip 4:
not active
Temperature sensor 1:
active
Temperature sensor 2:
active
Closing assist motor:
active
Luggage compartment cover, tolerance of the block counter:
Luggage compartment cover, tolerance of the block counter:
0
Luggage compartment cover, maximum no. of block drives:
Luggage compartment cover, maximum no. of block drives:
0
Luggage compartment cover, reverse path after obstacle recogn.:
Open:
0
Close:
0
Luggage compartment cover, detection area:
Detection area lower:
0
Detection area upper:
0
Luggage compartment cover, adjust. track tolerance:
Luggage compartment cover, adjust. track tolerance:
0
Luggage compartment cover, number bloom drives:
Luggage compartment cover, number bloom drives:
0
Luggage compartment cover, excess limitation in exclusion area:
Luggage compartment cover, excess limitation in exclusion area:
not active
Control module switch-off, switch-off time:
Control module:
0 min
Data bus:
4 min
-
- Posty: 6
- Rejestracja: 14 cze 2019, o 12:26
- Samochód: Superb III 4x4
- Silnik: 1.6TDI (120KM)
- Imię: Paweł
Re: OBD11 - kodowanie
Czy ktoś mógłby spróbować poniższe kodowania dać znać czy działają i czy jest jakaś różnica ?
Włączenie podświetlenia ambiente zależnego od profilu jazdy Sport, Eco itd
Lane assist włączony ciut wcześniej mniej odbija się od pasów
Dodanie do Lane assist podążania za samochodem przed gdy nie ma linii
Dodanie pseudo Predictive ACC(uwzględnienie trasy ograniczeń prędkości) u mnie kompletnie nie działa pojawia się tylko w opcjach
Pedestrian protection pojawia się w menu można nawet spróbować aktywować ale u mnie bez powodzenia prawdopodobnie brakuje kodowania Gateway
Lane change assist musi działać Lane assist
Włączenie podświetlenia ambiente zależnego od profilu jazdy Sport, Eco itd
Kod: Zaznacz cały
Module 19 Gateway
Security Access > 20103
Long Coding (Text mode) - FPA_Funktion_AMB -> active (Byte 11 Bit 7) NIE MA CHYBA
Module 09 (Central Electrics)
Security access -> 31347
Adaptation
Submenu - Int. Light, 2nd generation
- Ambiente_Farbwahl_FPA_waehlbare_Kopplung -> active (Default not active)
- Ambiente_Farbwahl_Individual -> 1 (Default 7)
- Ambiente_Farbwahl_FPA_waehlbare_Kopplung_Status_hmi_default -> coupled (Default active)
- Instrumententafelbeleuchtung mehrfarbig -> active
Submenu - Ambientelicht Zuordnung der Farbe zum Fahrprofil
- Fahrprofil_0: 5 - Coming/leaving home (door open and car off)
- Fahrprofil_1: 1 - Comfort
- Fahrprofil_2: 3 - Normal
- Fahrprofil_3: 4 - Sport
- Fahrprofil_5: 9 - Eco
- Fahrprofil_7: 7 - Individual
- Ambiente: Sollspannungsanforderung 13,5V (Default: Keine_Spannungsanforderung)
Submenu - Interior light, light configuration
- Ambientemenue mit globalem aus -> active
- Ambientemenue mit alle Zonen -> active
- Ambient_Farbliste_HMI -> active
Kod: Zaznacz cały
Long coding
Control unit: A5 Front Sensors Driver Assistance System
Values:
Point_of_intervention:
Old value: late
New value: early (można włączyć setting via menu wtedy pojawi się Adaptacyjne prowadzenie w menu)
Kod: Zaznacz cały
Long coding
Control unit: 13 Adaptive Cruise Control
Traffic_jam_dependent_linear_tracking:
Old value: Deactivated
New value: activated
Kod: Zaznacz cały
Long coding
Control unit: 13 Adaptive Cruise Control
Speed_limit_assistent:
Old value: Deactivated
New value: activated
Curve_assistent:
Old value: Deactivated
New value: activated
Kod: Zaznacz cały
Long coding
Control unit: 13 Adaptive Cruise Control
Pedestrian_protection:
Old value: Deactivated
New value: activated
Pedestrian_protection_advance_warning: Nie dziala
Old value: Deactivated
New value: activated
Long coding
Control unit: 17 Dash Board
Pedestrian protection, BAP distance:
Old value: No
New value: Yes
Adaptation
Control unit: 5F Information Control Unit
Name: Car_Function_List_BAP_Gen2
Pedestrian_Assist_0x3A:
Old value: Not activated
New value: activated
Name: Car_Function_Adaptations_Gen2
menu_display_Pedestrian_Assist:
Old value: Not activated
New value: activated
Kod: Zaznacz cały
Long coding
Control unit: 13 Adaptive Cruise Control
Lane_change_support:
Old value: Deactivated
New value: activated
Long coding
Control unit: 17 Dash Board
Lane change assistance:
Old value: No
New value: Yes
- Enriquez
- Administrator
- Posty: 13611
- Rejestracja: 2 cze 2012, o 09:20
- Samochód: Inny
- Rocznik: 2022
- Silnik: Inny
- Imię: Marcin
- Lokalizacja: Łódź - Wieś ELW
Re: OBD11 - kodowanie
W którym roczniku może to zadziałać?
Pozdrawiam
Marcin
---
Nie udzielam porad technicznych na PW. Nie podejmuję się wykonywania żadnych modyfikacji w cudzych samochodach. Proszę mnie o to nie pytać.
Marcin
---
Nie udzielam porad technicznych na PW. Nie podejmuję się wykonywania żadnych modyfikacji w cudzych samochodach. Proszę mnie o to nie pytać.
-
- Posty: 148
- Rejestracja: 18 sie 2019, o 21:24
- Samochód: Superb III
- Silnik: 2.0TSI (272KM)
- Aktualnie: obecnie 380/530
Re: OBD11 - kodowanie
pawlo_999 pisze:Czy ktoś mógłby spróbować poniższe kodowania dać znać czy działają i czy jest jakaś różnica ?
Włączenie podświetlenia ambiente zależnego od profilu jazdy Sport, Eco itdLane assist włączony ciut wcześniej mniej odbija się od pasówKod: Zaznacz cały
Module 19 Gateway Security Access > 20103 Long Coding (Text mode) - FPA_Funktion_AMB -> active (Byte 11 Bit 7) NIE MA CHYBA Module 09 (Central Electrics) Security access -> 31347 Adaptation Submenu - Int. Light, 2nd generation - Ambiente_Farbwahl_FPA_waehlbare_Kopplung -> active (Default not active) - Ambiente_Farbwahl_Individual -> 1 (Default 7) - Ambiente_Farbwahl_FPA_waehlbare_Kopplung_Status_hmi_default -> coupled (Default active) - Instrumententafelbeleuchtung mehrfarbig -> active Submenu - Ambientelicht Zuordnung der Farbe zum Fahrprofil - Fahrprofil_0: 5 - Coming/leaving home (door open and car off) - Fahrprofil_1: 1 - Comfort - Fahrprofil_2: 3 - Normal - Fahrprofil_3: 4 - Sport - Fahrprofil_5: 9 - Eco - Fahrprofil_7: 7 - Individual - Ambiente: Sollspannungsanforderung 13,5V (Default: Keine_Spannungsanforderung) Submenu - Interior light, light configuration - Ambientemenue mit globalem aus -> active - Ambientemenue mit alle Zonen -> active - Ambient_Farbliste_HMI -> active
Dodanie do Lane assist podążania za samochodem przed gdy nie ma liniiKod: Zaznacz cały
Long coding Control unit: A5 Front Sensors Driver Assistance System Values: Point_of_intervention: Old value: late New value: early (można włączyć setting via menu wtedy pojawi się Adaptacyjne prowadzenie w menu)
Dodanie pseudo Predictive ACC(uwzględnienie trasy ograniczeń prędkości) u mnie kompletnie nie działa pojawia się tylko w opcjachKod: Zaznacz cały
Long coding Control unit: 13 Adaptive Cruise Control Traffic_jam_dependent_linear_tracking: Old value: Deactivated New value: activated
Pedestrian protection pojawia się w menu można nawet spróbować aktywować ale u mnie bez powodzenia prawdopodobnie brakuje kodowania GatewayKod: Zaznacz cały
Long coding Control unit: 13 Adaptive Cruise Control Speed_limit_assistent: Old value: Deactivated New value: activated Curve_assistent: Old value: Deactivated New value: activated
Lane change assist musi działać Lane assistKod: Zaznacz cały
Long coding Control unit: 13 Adaptive Cruise Control Pedestrian_protection: Old value: Deactivated New value: activated Pedestrian_protection_advance_warning: Nie dziala Old value: Deactivated New value: activated Long coding Control unit: 17 Dash Board Pedestrian protection, BAP distance: Old value: No New value: Yes Adaptation Control unit: 5F Information Control Unit Name: Car_Function_List_BAP_Gen2 Pedestrian_Assist_0x3A: Old value: Not activated New value: activated Name: Car_Function_Adaptations_Gen2 menu_display_Pedestrian_Assist: Old value: Not activated New value: activated
Kod: Zaznacz cały
Long coding Control unit: 13 Adaptive Cruise Control Lane_change_support: Old value: Deactivated New value: activated Long coding Control unit: 17 Dash Board Lane change assistance: Old value: No New value: Yes
Pawlo_999 dzięki za zainteresowanie tematem , dzięki twoim nastawom udało się dogadać z moją pokrywą Wielkie dzięki za pomoc . biore kodowania które podałeś, sprawdzę `i dam znać.
- piramida
- Doradca
- Posty: 4042
- Rejestracja: 12 sie 2012, o 12:21
- Samochód: Superb III combi 4x4
- Rocznik: 2016
- Silnik: 2.0TSI (280KM)
- Aktualnie: 480bhp/570Nm
- Imię: Piotr
- Lokalizacja: Kraków
Re: OBD11 - kodowanie
Po obniżeniu zawieszenia i adaptacji, zawias lepiej pracuje i już tak nie dobija?
-
- Posty: 148
- Rejestracja: 18 sie 2019, o 21:24
- Samochód: Superb III
- Silnik: 2.0TSI (272KM)
- Aktualnie: obecnie 380/530
Re: OBD11 - kodowanie
Witam podświetlenie ambitne. Po kodowaniu nic się nie zmienia, kolor bez zmian. Lenaasist po aktywowaniu zaczyna mrugać radio . Może dlatego że nie mam adaptacyjnego temp. Tylko zwykły?pawlo_999 pisze:Czy ktoś mógłby spróbować poniższe kodowania dać znać czy działają i czy jest jakaś różnica ?
Włączenie podświetlenia ambiente zależnego od profilu jazdy Sport, Eco itdLane assist włączony ciut wcześniej mniej odbija się od pasówKod: Zaznacz cały
Module 19 Gateway Security Access > 20103 Long Coding (Text mode) - FPA_Funktion_AMB -> active (Byte 11 Bit 7) NIE MA CHYBA Module 09 (Central Electrics) Security access -> 31347 Adaptation Submenu - Int. Light, 2nd generation - Ambiente_Farbwahl_FPA_waehlbare_Kopplung -> active (Default not active) - Ambiente_Farbwahl_Individual -> 1 (Default 7) - Ambiente_Farbwahl_FPA_waehlbare_Kopplung_Status_hmi_default -> coupled (Default active) - Instrumententafelbeleuchtung mehrfarbig -> active Submenu - Ambientelicht Zuordnung der Farbe zum Fahrprofil - Fahrprofil_0: 5 - Coming/leaving home (door open and car off) - Fahrprofil_1: 1 - Comfort - Fahrprofil_2: 3 - Normal - Fahrprofil_3: 4 - Sport - Fahrprofil_5: 9 - Eco - Fahrprofil_7: 7 - Individual - Ambiente: Sollspannungsanforderung 13,5V (Default: Keine_Spannungsanforderung) Submenu - Interior light, light configuration - Ambientemenue mit globalem aus -> active - Ambientemenue mit alle Zonen -> active - Ambient_Farbliste_HMI -> active
Dodanie do Lane assist podążania za samochodem przed gdy nie ma liniiKod: Zaznacz cały
Long coding Control unit: A5 Front Sensors Driver Assistance System Values: Point_of_intervention: Old value: late New value: early (można włączyć setting via menu wtedy pojawi się Adaptacyjne prowadzenie w menu)
Dodanie pseudo Predictive ACC(uwzględnienie trasy ograniczeń prędkości) u mnie kompletnie nie działa pojawia się tylko w opcjachKod: Zaznacz cały
Long coding Control unit: 13 Adaptive Cruise Control Traffic_jam_dependent_linear_tracking: Old value: Deactivated New value: activated
Pedestrian protection pojawia się w menu można nawet spróbować aktywować ale u mnie bez powodzenia prawdopodobnie brakuje kodowania GatewayKod: Zaznacz cały
Long coding Control unit: 13 Adaptive Cruise Control Speed_limit_assistent: Old value: Deactivated New value: activated Curve_assistent: Old value: Deactivated New value: activated
Lane change assist musi działać Lane assistKod: Zaznacz cały
Long coding Control unit: 13 Adaptive Cruise Control Pedestrian_protection: Old value: Deactivated New value: activated Pedestrian_protection_advance_warning: Nie dziala Old value: Deactivated New value: activated Long coding Control unit: 17 Dash Board Pedestrian protection, BAP distance: Old value: No New value: Yes Adaptation Control unit: 5F Information Control Unit Name: Car_Function_List_BAP_Gen2 Pedestrian_Assist_0x3A: Old value: Not activated New value: activated Name: Car_Function_Adaptations_Gen2 menu_display_Pedestrian_Assist: Old value: Not activated New value: activated
Kod: Zaznacz cały
Long coding Control unit: 13 Adaptive Cruise Control Lane_change_support: Old value: Deactivated New value: activated Long coding Control unit: 17 Dash Board Lane change assistance: Old value: No New value: Yes
-
- Posty: 48
- Rejestracja: 24 lip 2019, o 07:51
- Samochód: Superb III combi 4x4
- Silnik: Inny
- Imię: Adrian
Re: OBD11 - kodowanie
Panowie, wybaczcie bo pewnie padło już takie pytanie, jak podchodzi do tego serwis? Nie ma problemów z gwarancją?
- Elninjo
- Posty: 692
- Rejestracja: 23 sie 2016, o 08:06
- Samochód: Inny
- Silnik: 2.0TDI (190KM)
- Aktualnie: 240 / 430
- Imię: DarYush
- Kontakt:
Re: OBD11 - kodowanie
Nie nie problemów z gwarancją...
Wysłane z mojego SM-G950F przy użyciu Tapatalka
Wysłane z mojego SM-G950F przy użyciu Tapatalka
-
- Posty: 61
- Rejestracja: 16 lis 2016, o 19:21
- Samochód: Inny
- Silnik: Inny
- Lokalizacja: Miasto Królów Polski
Re: OBD11 - kodowanie
Eldarzuz9 pisze:Dzięki, ktoś z forum tym handluje, żeby wziąć od swojego?
Natapane z szarik Samsung S8